Return to 60-Cycle Catalog
12-H-150 1760 RPM
| Impeller Data | Bowl Data | ||||||
| Impeller Model | 12-H-150 | Bowl Model | 12-H | ||||
| Type | Enclosed | Connection Type | Bolted | ||||
| Diameter: A= | 10.030" | Outside Diameter: nominal | 12.750" | ||||
| B= | 9.330" | minimum | 12.400" | ||||
| C= | 8.630" | Column Pipe Size: minimum | 8" | ||||
| Hydraulic Thrust Factor | 7.9 lbs/ft of head @ peak efficiency | maximum | 10" | ||||
| Impeller Weight | 14.7# | Suction Pipe Size | 8" | ||||
| Number of Vanes | 8 | Shaft Size: standard | 1.687" | ||||
| Specific Speed (Ns) | 2478 | maximum | Consult Factory | ||||
| Effective Eye Area | 23.37 in² | Lateral: standard | 0.750" | ||||
| W (r sq.) | 0.919 lbs -ft² | maximum | Consult Factory | ||||
| Eye Fluid Velocity | 0.01 ft/sec/gpm | Shaft Bearing Clearance | 0.010" | ||||
| Peripheral Velocity | 7.68 ft/sec/inch of impeller diameter | Impeller Skirt Clearance | 0.015" | ||||
| Maximum Sphere Size | 0.775" | ||||||
| Efficiency Correction for Impeller Data | *Maximum Head @ 1.0 s.g.: | ||||||
| Number of Stages | 1 | 2 | 3 | 4 | 5+ | with nominal outside dia. | 567 ft |
| Deduct No. Points | 4 | 3 | 2 | 1 | 0 | with minimum outside dia. | 505 ft |
| Lengths | Operational | ||
| Column Adapter | 1.500" | Minimum Required Submergence | Consult Factory |
| Discharge Case | 4.750" | Standard Construction Materials | |
| Bowl | 10.750" | Bowl | A48-30 c.i. (porcelain) |
| Suction Case | 10.125" | Impeller | C83800 br. |
| Suction Bell | 8.500" | Bowl Shaft | 416 stainless steel |
| Submersible Motor Adapter | Consult Factory | Shaft Coupling | C1215 steel |
| Approximate Shipping Weights | Lock Collet | C1215 steel | |
| First Stage | 280# | Cap Screw | grade 5 |
| Additional Stage | 121# | Bowl Bearing | C93200 br./buna-N A40 |
| Suction/Submersible Motor Adapter Bearing | C93200 br. | ||
| Miscellaneous | Throttle Bearing | C93200 br. | |
| Hub Projection on Bell Suction | 1.625" | Sand Collar | C93200 br. |
| Cable Guard Height | 0.500" | Column Adapter/Discharge Case/Suction Case | A48-30 c.i. |
| Distance from
Impeller Eye to Bottom of Bell Suction |
8.438" | Submersible Motor Adapter | A48-30 c.i. |
| Tube Adapter | cl. 65-45-12 ductile iron | ||
* Not valid for submersible applications -- o-rings required if the maximum operating head will exceed 500'